Royal Enfield Interceptor 650 2018, Owner'S Manual, Page: 103 / 141

102
PRECAUTIONS
n Remove ignition key and seal the ignition key barrel slot using adhesive tape.
n Cover the silencer tail pipe, horn and control switches with suitable plastic bags and tie it firmly to prevent water entry.
n Wash the motorcycle only when the engine is in cold condition.
n Do not remove side panel while washing to avoid water entry.
n Brush engine area with a recommend non corrosive solvent to remove dirt or grease.
n Use low pressure water jet to clean.
n
Never spray water with great force on head lamp, meter/cluster unit, flasher lights, front and rear wheel hubs, electrical
connections and wires, control cables, EFI components, spark plug, battery, side panels.
n Do not apply any corrosive solvent on painted surfaces or rubber parts.
n
Use lukewarm water and mild detergent on the painted components to remove dirt, etc.
n
WASHING PROCEDURE
Clean motorcycle thoroughly with plain water to remove the detergent.