Royal Enfield Himalayan, Service Manual, Page: 66 / 214

ROYAL ENFIELD HIMALAYAN BS III VEHICLE SERVICE MANUAL
65
S.
No.
Fastener, Size, Tool Usage, Precautions, Photos
Aggregate to Assemble/
Instructions
8.2 Pulse air valve on
frame

Locate pulse air valve in
the frame such that the
outlet is facing down, the
inlet from carburetor is
on the RH side and the
inlet from air filter is on
the Left side of the frame

Ensure the dampers and
spacers are in place in
the mounting locations
and tighten with 2 hex
flange bolts M6X30

Apply grease on the
gasket and locate it on
the cylinder head

Locate worm clip on the
braided hose and
assemble braided hose
on the outlet tube of the
pulse air valve

Position braided hose
flange over the gasket on
cylinder head , align the
holes and tighten with
two hex socket head cap
screws

Tighten worm clip over
the braided hose.

Connect the rubber
hoses from airfilter and
inlet manifold
respectively and slide
the clips in place.
Flanged Hex Bolts: M6
Socket spanner: 8mm
Torque:10-12Nm
(1.0-1.2 Kg.M)
Screw driver
Hex soc hd cap screws:
M6X20
Allen key: M5
Torque:10-12Nm
(1.0-1.2 Kg.M)