Royal Enfield Himalayan, Service Manual, Page: 202 / 214

ROYAL ENFIELD HIMALAYAN BS III VEHICLE SERVICE MANUAL
201
INSTRUMENT CLUSTER
A. Main LCD
B. Speedometer
C. Tell tales
D. Tachometer
E. Mode button
F. Select button
G. Compass LCD
H. Fuel gauge
1. Clock
2. Ambient Temperature
3. Service reminder
4. Odometer
5. Trip Value(A/B & F), AVG speed A/B
6. Side Stand indication
7. Gear position indication
A. MAIN LCD
CLOCK

Display in 12 hour format with AM/PM indication.

Will reset to 12:00 AM when battery is
disconnected.
CLOCK SETTING
Function
Switch
Pressure
time (sec)
Action
SELECT &
MODE
pressed with
No Speed
input
CLOCK
SETTING
MODE
> 3 sec
In ignition key ON position
Enters into clock setting
mode and hour digits starts
to blink
SELECT < 1 sec
Hours value shall increment
by 1 accordingly for no of
press
SELECT > 3 sec
Hour value saved and
minute digits starts to blink
SELECT
< 1 sec
Minutes value will increase
by 1 by each press of the
“Select’ button
SELECT > 3 sec
Minute value save and PM/
AM digits starts to blink
SELECT < 1 sec
PM / AM is interchangeable
by each press of the “Select’
button
SELECT > 3 sec
PM / AM save and exit from
clock set mode
NO ACTION 20 sec
Auto exit without saving
changes and continue with
previous setting
NEVER attempt to operate the select or reset buttons
while riding the motorcycle. Failure to do so may cause
loss of concentration and unstable riding, leading to a
potential accident, resulting in serious injury to both
rider and other road users, besides causing severe
damage to the motorcycle.
WARNING