Royal Enfield Himalayan, Service Manual, Page: 102 / 214

ROYAL ENFIELD HIMALAYAN BS III VEHICLE SERVICE MANUAL
101
Fastener, Size, Tool Usage, Precautions, Photos
Aggregate to Assemble/
Instructions
11.19
Front wheel

Remove the wedge
placed between the
brake pads in the caliper.

Ensure pinch bolt on
fork end LH side is loose.

Apply grease on the
spacer and locate inside
hub on brake disc side.

Locate wheel speed
sensor on the hub RH
side.

Position wheel between
the front forks duly
ensuring.
- Brake disc is correctly
positioned between the
brake pads.
- Wheel speed sensor is
positioned in the fork
end LH.

Locate spacer between
wheel speed sensor and
fork end RH and insert
spindle through the fork
end LH completely.

Assemble washer and
Hex nut on the spindle.
Hold spindle and tighten
axle nut to torque.

Tighten the pinch bolt on
fork end LH.

Remove the support
provided under the
vehicle.
S.
No.
NOTE:
Ensure inner lugs are
properly seated in the slots
in wheel hub.
NOTE:
Ensure outer lug is aligned
with the slot in fork end RH
NOTE:

Do not force the spindle
through as it will damage
the bearing and the
threads in the spindle.
Hex. Soc. Head Cap
Screw : M8
Allen Key : 6mm
Hex. Nut : M16
Ring Spanner : 24 mm
Torque : 70Nm / 7Kg.M