Royal Enfield Classic 500, Owner'S Manual, Page: 71 / 90

70
Preparing the motorcycle for reuse

Remove the anti rust solution from all plated parts
and clean the motorcycle well.

Inflate the tyres to the correct tyre pressure.

Ensure battery is fully charged and proper
electrolyte level is maintained.

Connect the battery.

Lubricate all control cables and pivots.

Check proper level of oil in engine.

Fill fuel tank with fresh petrol.

Check fuel line for any cracks or cuts.

Clean the air filter.

Remove plastic covering from the silencer.

Switch on ignition switch.

Start motorcycle and warm up engine for a few
minutes before riding the motorcycle.
NOTE :
Do not raise the engine RPM the moment it is
started, but allow the engine to run at idling
speed.
STORAGE PRECAUTIONS