Royal Enfield Classic 500, Owner'S Manual, Page: 65 / 90

64

Position new bulb inside the reflector such that
the three projections on the bulb align with the
slot on the reflector.

Refix the bulb holding clamp.

Fit the rubber grommet and connect the electrical
connections.

Position head lamp onto the head lamp casing
and tighten the mounting screw on top.
Caution :
Never touch the bulb glass with bare fingers as it
leave finger prints on the glass and reduce the
lighting intensity.
Hold the bulb only at its base near the terminals.
Tail Lamp Bulb

Remove the two nuts holding the rear license
plate.

Remove the three screws holding the tail lamp
to the bracket.
MINOR MAINTENANCE TIPS

Refit the bulb holder and turn clockwise to lock
the bulb holder.

Refit the tail lamp on the bracket and rear license
plate.

Twist the bulb holder anticlockwise and remove.

Remove the old bulb and replace with a new bulb.