Royal Enfield Classic 500, Owner'S Manual, Page: 33 / 90

32
Proper running-in is very important for obtaining maximum life and performance of a new motorcycle. The
following guidelines explain proper running-in procedures.
This will help the various parts of the engine and vehicle to "bed in" smoothly with prolonged full throttle
operation, or in high speed conditions might result in excessive heating of the engine and cause abnormal
wear of the moving parts and result in premature failure.
1. 0- 500 Kms (0- 300Miles.):
The recommended speeds for the first 300 Miles (500 Kms) is 50-60 Km/h (35-40 MPH). During this period
avoid operating the motorcycle with full throttle opening. Stop the motorcycle for about 5 to 10 minutes to
let it cool down, after every hour of running. Vary the speed of the motorcycle regularly during running but
avoid using the motorcycle above 1/2 throttle opening position.
Caution :
After covering the first 500 Kms (300 Miles), please replace the engine oil and filter.
RUNNING IN