Royal Enfield Classic 350, Owner'S Manual, Page: 40 / 100

3 9
REAR WHEEL REASSEMBLY

Ensure the four cush rubbers are in position
inside the rear wheel hub.

Tilt vehicle to right and insert wheel assembly
between the swing
arms.

Position the rear wheel
with cush rubber on
the rear chain
sprocket.

Hold wheel collar and
spacer in position.

Assemble the wheel
spindle along with chain adjuster from the LH
side of vehicle and gently tap it through the
wheel.

Ensure that the chain adjuster notch butts
with the stopper as appropriate when both
the front & real wheels are aligned.
Do it yourself

Tighten the castle nut firmly and ensure that
the hole on axle shaft and the slot on castle
nut are aligned to enable split pin fitment.

Fit the split pin.
REAR BRAKE PEDAL HEIGHT

Loosen the lock nut

Turn in or out the pedal stop pin till the brake
pedal and front footrest are in the same height
as shown in fig.