Royal Enfield Classic 350 2019, Owner'S Manual

Page: 43 / 126

42
ASSEMBLING THE HEAD LAMP BULB
1. Refix the new halogen
bulb into reflector unit of
the headlamp.
2. Gently press the bulb
holding clip and lock the
free end in its slot.
3. Fit the rubber grommet.
4. Connect the electrical
connections carefully &
assemble the headlamp
in the reverse order of
dismantling.
MINOR MAINTENANCE TIPS
C A U T I O N
Never touch the bulb with your
fingers, Finger prints will etch the
glass and decrease bulb life. Always
hold the bulb with paper or clean dry
cloth during handling.
CHANGING ELECTRICAL COMPONENTS
HEADLAMP BULB REPLACEMENT

Loosen the rim holding screw on
top and take out the head light
reflector.

Disconnect the wiring coupler
over the bulb.
 Remove the rubber grommet
from the bulb.
 Press the clip by thumb to release
the free end from bulb holder.

Pull out the bulb.