
ROYAL ENFIELD VEHICLE SERVICE MANUAL - EURO IV
209
- Ensure MIL Indications goes off after above method.
- This will help to recalibrate the MIL and store the error code in the ECU.
If in case the defect is not eliminated and the MIL glows continuously, proceed to
level 2 test pin method
to
resolve the defect.
LEVEL 2 TEST PIN METHOD
An open single pole connector is provided close to the UCE.
Connect a piece of wire to this connector and suitably ground it to the motorcycle body.
Switch ON ignition and engine stop switch and observe the MIL keenly for a series of short and long blinks at
different intervals, to identify the defective sensor / wiring connection as detailed in the table below,
KS MOTORCYCLES - http://ksmotorcycles.com