Rowenta GS6010, Instructions For Use Manual

Page: 5 / 36

5
Assembly :
Preparation:
•
Place the base on the floor and
remove the water tank.
Install pole in main unit:
•
Insert the pole according to the diagram
to the right, ensuring the marks on the
unit and the pole line up.
•
Press pole firmly into place.
Locking the pole :
•
Lay the base on its side with the
inserted pole.
•
Turn the lockbar located on the bottom
of the base 90° to secure the pole.
Use a coin or similar object to turn the
lockbar.
•
After the pole is locked, pick up the
unit and return to its use position
Installing Integrated Hanger :
•
Position the hanger with the brush
hooks facing to the outer side
•
Check for correct orientation with the
index marks matching
• Insert the end of the hanger into the
pole connection and press it into the
pole until the hanger properly
engages.
• If it is required to dismantle the pole
from the main unit, tilt the appliance
and unlock the pole first
•
Then place the appliance back into it’s
upright position and pull out the pole
•
Dismantling of the hanger from the
pole by the customer is not foreseen.
Attaching Steam hose to main unit :
1) Insert hose plug into hose connector
on main unit.
2) Secure hose connector by pulling
clamping ring upwards.
1
2
1103903908-index 01 GS6010 USA_110x154 27/04/12 08:35 Page5