Rowe Scan 600-20, Operating Manual

Page: 58 / 140

59
Scale factor : Enlargment and / or
reduction factor in % (100%: no
scaling). Setting range 1.0 to 999.0 %.
Page size : Auto (according to set factor)
or scaled to a special default format
(e.g. ISO A4).
Fixed format On / Off : If the fixed format
is activated ( On ), the length in feeding
direction is considered in addition to the
width when scaling to the default format
selected under "Page size".
If the fixed format is enabled, one part of
the information is cut off if the original is
longer than the fixed format to be scaled
to on the basis of the detected width.
Orientation : Selection of portrait or
landscape (when scaling to default
format).
Figure 5.34: Scaling
5.11.3.5 Info
In the area "Info", useful status information
is given. The contents of the area "Info" can
be selected in the ScanManager settings
(see 5.15).
Figure 5.35: Area "Info"
5.12 Favorites
ROWE ScanManager provides a vast range of settings to adjust scans and copies
according to individual requirements. Often a manageable number of settings and / or
combinations of settings are used over and over again. In order that you do not have to
set and adjust each option individually again, you can save settings once made as so-
called
Favorites . These settings can then simply be loaded again by a few clicks and are
always available. For this purpose, click the "Favorites" function. In each favorite you can
save all scan and print settings described in Chapter 5.11. The set function as well as the
file format TIFF/PDF present the only exception from the above.