65
changes.
Delete output configuration
(4)
: Click
here if you want to remove an output
configuration from the favorite.
If you start an output with a Multiprint favorite
being activated, a dialog box pops up after
pressing the start key where you can check/set on
which output devices to output:
1.
Activate/deactivate output on device
:
Enable the field if you want to output on
the indicated device otherwise remove
the check mark by clicking.
2.
Number of copies
: For output on a
printer you can enter the number of
copies in this text box before starting if
more than one copy is needed. Here, the
name of the printer is also shown. For
Scan to File
the target folder appears.
3.
Start
: By pressing the Start button, the
operation is started.
Figure 5.40: Multiprint output
5.12
Job List
The function "Print jobs" of serves the management of print jobs. The general structure of the job
list is shown in Figure 5.41.
