60
Scale factor
: Enlargement and/or
reduction factor in % (100 %: no
scaling). Setting range 1.0 to
999.0 %.
Page size
: Auto (according to set
factor) or scaled to a special
default format (e.g. ISO A4).
Fixed format On/Off
: If the fixed
format is activated (
On
), the
length in feeding direction is
considered in addition to the
width when scaling to the default
format selected under "Page size".
If the fixed format is enabled, one
part of the information is cut off if
the original is longer than the fixed
format to be scaled to on the basis
of the detected width.
Orientation
: Selection of portrait
or landscape (when scaling to
default format).
Scale Mode
: According to the
three options, the document is
positioned on the printout and/or
adjusted.
Original:
Maintain original size.
Fit:
If required, the document is
scaled down to the selected
format.
Assimilate (bigger or smaller):
Document completely utilizes the
selected format.
Page position:
Not available if
Assimilate (bigger or smaller)
was
selected. Otherwise, the position
of the document on the roll is
defined. E.g. "Center".
Figure 5.32: Scaling
