59
User-defined
: If you select "
User-defined
“, you can enter any
dimension for the scan range in the displayed text fields:
Width
: Scan width in mm
Length
: Scan length in mm
Start at
: Start position in feeding direction from beginning
of document in mm
Zero point
: The zero point is marked in the middle of the
feed table of the scanner. In the default setting, the middle
of the document has to be close to the zero point. By
means of this option, you can shift the reference point for
the middle of the document to the left (negative value) or
right (positive value).
Figure 5.30: User-defined
format
5.10.3.4 Scaling/Margins
In the area "Scaling/Margins" you can add,
cut off, extend, or reduce margins on the
four sides of a document.
Enter positive values in the four text fields
in order to enlarge the left (1), right (2),
front (3) and/or rear margin (4) (white). If
you want to cut the margin off, simply
enter negative values.
By means of the "Zoom" button, you
access a submenu where you can select
extensive scaling options.
Figure 5.31: Scaling/margin
