51
4.
Fallback folding machine:
Response to folding machine not existing or not ready (also
refer to 5.13.4).
5.
Fallback tab:
Response to missing tab if a folding program with tab is selected (also refer
6.
Fallback output bin:
Response to output bin which is not available and/or full (also refer
After having enabled all requested settings, you return to the previous view by pressing
"Back"
.
Figure 5.19: Extended settings for ROWE printer
In the advanced settings you can select the following options if you selected a ROWE printer:
1.
Priority
: Define behavior in printer job list.
Normal
: The job is added to the job list normally.
Low:
All print jobs with a higher priority are prioritized.
High:
The print job is started as soon as possible.
Suspended
: For the time being, the drawing is not printed but the job has to be
started manually on the printer.
2.
Tolerance
: Define the tolerance by which the dimensions of the document may be
exceeded (in %) for the document being printed on the next smaller roll nonetheless.
In this case, the print is not reduced correspondingly but the protruding part is cut
off.
3.
Label
: Selection of the label defined on the printer and to be printed on the document.
4.
Banner
: Here you can select the banner file and set whether this banner shall be output
at the beginning and/or end.
5.
Stamps
: Selection of a stamp defined on the printer and to be printed on the document.
6.
Fallbacks
: Here, you can define the printer's response if the required material and/or
format of the print medium is not available. Options are:
