Roverpet
20 Kiji Dava Circle Prescott, Arizona 86301
1-800-658-5925
Page 1 of 3
Roverpet #WB3644DSF
– 36”high 4x4 Whelping Box Assembly Instructions
Inventory list for The Roverpet #WB3644DSF Whelping Box:
(7)
#136
36” high panels
(1)
#D36
36” high door
(2)
#F24
2’x4’ floors
(1)
#44PR5
5
” high puppy rail assembly (two leg bars, two cross-bars and four legs
(1)
#44DPK
Designer Puppy Keeper (6
” high)
(4)
#180
straight stabilizers
(4) #90
corner stabilizers
(12)
#250
floor/divider clips
(24)
#200
panel clips (pre-assembled onto frames by Roverpet)
Assembly Procedure
1.) Unpack contents of shipping carton and compare to parts list above.
2.) Layout the two #136 panels / #D36 door sub-assemblies as show below, with the assembly containing the
door positioned on the right side.
3.) Connect the ends of the sub-assemblies together with the #200 panel clips that are already attached to the
end panels; reposition panels into a square shape resembling the main photo at the top of this page.
4.) Install #180 straight stabilizers onto the top of in-line connected panels (left photo below) and install #90
corner stabilizers onto the top of corner connected panels (right photo below).
5.) Lay floor trays side-by-side into the bottom of the Roverpet whelping box with the frame pipes facing up to
allow connection to the side panels.
#200 panel clips- pre-attached
to end panels here by Rover
Co.