Roverpet
20 Kiji Dava Circle Prescott, Arizona 86301
1-800-658-5925
Page 1 of 3
Roverpet #WB1844DSF
18” high 4’ x 4’ Whelping Box Assembly Instructions
Inventory list for Roverpet #WB1844DSF Whelping Box:
The Roverpet
#WB1844DSF
-
18” high 4x4 Whelping Box includes:
(7)
#118
-
18” high Panels
(1)
#D18
– 18” high Door
(2)
#F24
2’x4’ floors
(1)
#44PR3
3” high puppy rail assembly (two leg bars, two cross-bars and four legs)
(1)
#44DPK
Designer Puppy K
eeper (6” high)
(4)
#180
straight stabilizers
(4)
#90
corner stabilizers
(12)
#250
floor/divider clips
(16)
#200
panel clips (pre-assembled onto frames by Roverpet)
Assembly Procedure:
1.) Unpack contents of shipping carton and compare to parts list above.
2.) Layout the two #118 panels / #D18 door sub-assemblies as show below, with the assembly containing the door
positioned on the right side.
3.) Connect the ends of the sub-assemblies together with the #200 panel clips that are already attached to the end panels;
reposition panels into a square shape resembling the main photo at the top of this page.
4.) Install #180 straight stabilizers onto the top of in-line connected panels (left photo below) and install #90 corner
stabilizers onto the top of corner connected panels (right photo below).
#200 panel clips- pre-attached
to end panels here by Rover
Co.