• Key in a new value e.g.
• Press ENTER to confirm
• First select the signal type: or or
• Then repeatedly press the keys: or or
to get various measurements: Power, BER, MER, PER, Constellation
• Press for the IMPORTANT SETTINGS:
- BATTERY SAVING = ON or OFF
- CONFIGURATIONS = SAT, TV & CABLE
• Press to select the required memory plan
• Press and select VIDEO IN and select EXT (only where available)
• Select FREQ or MRK.FR
• Keep ENTER pressed 2”
• Select
CHAN
or TRANSP
• Navigate
• Select CHAN or TRANSP
• Keep ENTER pressed 2”
• Select from a drop-down list
• Press ENTER
• Press to enable spectrum analyzer mode
• Press again to enable the MAX HOLD function (max peak)
• Press to turn ON
• Keep pressed 2” to turn OFF
• Press to go to HOME MENU
• Press and hold for more than 10” to RESET, then turn ON
• POWER ON and immediately after press VOLUME and hold until it beeps
• Rotate to navigate
• Press (ENTER) to select
Turn ON/OFF - HOME ____________________________
QUICK REFERENCE GUIDE
Hardware reset __________________________________
Software reset ___________________________________
Navigation wheel _________________________________
Main MENU measurements ______________________
Volume & Configuration Menu ____________________
Memory plans ____________________________________
VIDEO EXT input __________________________________
Frequency direct selection ________________________
Spectrum mode __________________________________
Select: ___________________________________________
ENTER
or
Chan, Transp, Freq, Ref.Level, Span, etc. in MEAS & SPECT.
in MEAS & SPECT.
CHAN
41
8 4 2
.
0 0
TRANSP
TR
26
TR
30 11656.0
AN.SAT
TR
31 11671.0
DigSAT
