X935-25-00 Rev 1110 V894CSH High-Security Cameras
Installation
•
9
SLC
Side Light Compensation can adjust the brightness of the image in the corners of the screen. It can be turned
ON or OFF (default). ON allows settings of 0-50.
HME
Highlight Mask Exposure is ON or OFF (default) selectable. When ON, the camera cuts peak white levels,
masking highlight areas of a scene. This can be adjusted from 1-60.
DIS
Digital Image Stabilization can be turned ON or OFF (default); this would be turned on when the camera is in
an environment of high vibration. This is not available if Max DR is enabled.
Motion
The motion screen permits setting up motion detection areas on the screen with a range of sensitivities.
Motion
Motion detection can be set to ON or OFF (default). This feature allows the detection of movement in 240
areas of the screen and display an alarm on the screen.
Set Window
When motion detection is set to ON, the Set Window screen displays to show the 240 areas. Individual areas
can be selected for motion detection. To exit this screen, navigate to any outermost corner of the screen.
All Set/All Clear
An All Set to select all the areas and a Clear All that deselects all areas can be used.
Sensiti
Each area has an individual sensitivity level of 0-120; a higher sensitivity level detects smaller movement.
Show Indi
After the areas are setup, there is a choice of how motion detection is indicated during live video, icon or
trace. If icon is selected, a small motion icon displays on the screen when motion is detected; trace shows an
overlay of the motion areas on the image to indicate motion.
Delay Out
Delay out of 1-15 sec can be selected, which delays the display of the alarm signal on the screen.
Privacy Mask
Up to six privacy mask zones can be created on the screen to block video that is desired to be hidden.
Privacy masks can be turned ON or OFF (default). When turned ON, the mask range is used to shape and
locate the mask on the screen. One of eight colors of the mask can be selected.
