JACKMAN FUSION EQUIP
–
ELECTROFUSION PROCESSOR OPERATORS MANUAL - REV 0
Page 1 of 48
SAFETY
•
Please read and understand this instruction manual before using the
Roughneck Electrofusion
Processor
.
•
Gas company safety standards and precautions should be followed at all times.
•
Do not use or store the
Roughneck Electrofusion Processor
where volatile gas concentrations may be
present.
•
Only properly trained and qualified personnel should operate the
Roughneck Electrofusion Processor
.
•
Treat electrical equipment as a potential source of ignition and follow proper practices for working in
an explosive atmosphere.
•
Power source and the
Roughneck Electrofusion Processor
must be located out of the trench.
•
For protection against the risk of electric shock, connect the
Roughneck Electrofusion Processor
to
properly grounded outlets only.
•
Only use fusion information supplied by the manufacturer of the fitting.
•
Under no circumstances should the
Roughneck Electrofusion Processor
enclosure be opened. All
warranties are void if the factory seal has been broken.
•
Before any fusion is performed, it is the responsibility of the operator to always verify that all the
information displayed is correct per the fitting manu
facturer’s recommendations for fusing the
attached fitting under the current ambient conditions.
