Thank you for choosing Rough Country
Please read instructions before beginning installation. Check the kit hardware against the parts list and product layout. Be sure
you have all needed parts and know where they go. Also please review tools needed list and make sure you have needed tools.
If question exist we will be happy to answer any questions concerning the design, function, and correct use of this product.
INSTALLATION INSTRUCTIONS
1.
Place vehicle on a flat surface and set emergency brake
.
2.
The center and rear brackets are notched, the number of notches on the bracket determines the position in which it should
be mounted. One notch is the front, two notches is the center and three notches is the rear bracket.
See Photo 1.
3.
On a flat surface, attach the mounting brackets to the main rail using the supplied 8mm x 20mm bolts, flat washers and lock
washers .
See Photo 2.
Tighten using a 13mm wrench. Torque to 18 ft
-
lbs.
921907690
PHOTO 1
Kit Contents:
1– Dr Main Step Rail
1– Pass Main Step Rail
2– Front Step Mounting Brackets
2– Center Step Mounting Brackets
2– Rear Step Mounting Brackets
6
-
Steps Shims
1– 90768Bag including:
6– 8mm x 35mm Bolts
42– 8mm Flat Washers
12– 8mm x 20mm Bolts
18– 8mm Lock Washers
12– 8mm 25mm Bolts
12– 8mm Flange Lock nuts
Tools Needed:
13mm Socket/Wrench
Ratchet
Torque Wrench
Attach bracket with supplied hardware.
PHOTO 2
Front
Center
Rear
JEEP 2018 JLU 4
-
Door Step
