Rottler SG10A, Operation And Maintenance Manual

Page: 30 / 124

Section 3 Safety SG10A Manual
www.rottlermfg.com
3-7
Electrical Safety Features Of Rottler DM Controlled Machines
All Rottler machines that use the DM operational control system are designed to comply with all
applicable safety standards. This includes but is not limited to the following systems:
• Thermal sensors in all motors and motor controls.
• Current sensors in all motor control panels.
• Electrical breakers to prevent voltage surges and spikes from reaching electrical system.
• Electrical lockout on main electrical enclosure.
• E-Stop that shuts down all operational systems in an event of an emergency.
All thermal and current limits for motors and motor controls are preset at the factory. In the event that any
of those parameters are exceeded during operation of the machine, the machine control system will shut
down the machine and a warning of the specific fault will appear on the control screen.