Rottler S7AD, Operation And Maintenance Manual

Page: 30 / 114

Section 4 Control Definitions S7-8AD Manual
www.rottlermfg.com
4-4
button and contact must be maintained or the travel will stop.
Rapid Down
will cause the spindle to move down quickly at a fixed rate of speed. The button is a
momentary button and contact must be maintained or the travel will stop.
Feed Buttons
Feed Up button moves the spindle up at a fixed feed rate. If the spindle is rotating, the spindle will move
up using the feed rate value set by the operator. This button is a latching button and will remain activated
until the end of travel is reached or the operator touches the button a second time.
Feed Down button moves the spindle down at a fixed feed rate. If the spindle is rotating, the spindle will
move down using the feed rate value set by the operator
.
This button is a latching button and will remain
activated until the end of travel is reached or the operator touches the button a second time.
CW and CCW Buttons
CW rotates the spindle in the Clockwise direction until released.
CCW rotates the spindle in the Counter-clockwise direction until released
Definitions of Control Buttons