Rottler P69AHD, Operation And Maintenance Manual

Page: 7 / 210

Section 1 Introduction P69AHD Manual
www.rottlermfg.com
1-2
Description
The Rottler P69AHD is a 5-axis CNC machine designed and developed specially for porting cylinder
heads. The design of the machine allows the center of the “ball shaped” cutting tool to rotate about its
own center on the 5th axis.
This unique design has many benefits to a performance engine builder of which the most important are
ease of programming and the fastest and most accurate method to port cylinder heads.
Disclaimer
The P69AHD Manual (henceforth to be referred to as the “Manual”) is proprietary to Rottler Manufacturing
LLC. (“Rottler Manufacturing”) and no ownership rights are hereby transferred. No part of the Manual
shall be used, reproduced, translated, converted, adapted, stored in a retrieval system, communicated or
transmitted by any means, for any commercial purpose, including without limitation, sale, resale, license,
rental or lease, without the prior express written consent of Rottler Manufacturing.
Rottler Manufacturing does not make any representations, warranties or guarantees, express or implied,
as to the accuracy or completeness of the Manual. Users must be aware that updates and amendments
will be made from time to time to the Manual. It is the user’s responsibility to determine whether there
have been any such updates or amendments. Neither Rottler Manufacturing nor any of its directors,
officers, employees or agents shall not be liable in any manner whatsoever to any person for any loss,
damage, injury, liability, cost or expense of any nature, including without limitation incidental, special,
direct or consequential damages arising out of or in connection with the use of the Manual.
Rottler Manufacturing and its employees or representatives are not responsible for any information
regarding final specifications of any workpiece that is created as a final product when using Rottler
equipment. It is the responsibility of the end user of Rottler equipment to determine the final dimensions
and finishes of the workpiece that they are working on. Any information regarding final dimensions and
finishes that appears in any Rottler literature or that is expressed by anyone representing Rottler is to
be regarded as general information to help with the demonstration of or for operator training of Rottler
equipment.