Roto ZFA M 6 H/K Series, Manual

Page: 8 / 54

6
General safety instructions
• Read this manual carefully before installing and op-
erating the device and follow all instructions.
• Ensure that this manual is accessible to all users.
• Keep this manual in a safe place until you dispose of
the product.
• If the product changes hands, pass this manual on to
the new owner.
Intended use
The blackout blind is intended for indoor use and for
blacking out rooms.
It may only be installed and used on the Roto skylight
types designed for their use.
The blackout blind protects against laterally incident
light. The patterns are opaque but do not to black out
the room completely (in a physical sense).
Certain effects in the curtain, for example, waviness
along the edges and the resulting slightly sideways
incidence of light, are possible despite sophisticated
production and processing technology and do not
constitute grounds for complaint.
Technical data
The dimensions depend on the type and on the size of
the window.
Unpacking/checking the scope
of delivery
(Fig. A1-A2)
⚠
Risk of suffocation!
Plastic parts, polystyrene, screws, small
parts, etc., can be very dangerous for chil-
dren to play with.
> Do not leave the packaging material and installa-
tion parts lying around, and keep away from chil-
dren and toddlers.
• Please dispose of the packaging material (cardboard,
polystyrene, plastic bag) according to local regulations.
• When unpacking and installing the device, work with
clean hands or with gloves to avoid soiling the product.
• Please check the scope of delivery. If parts are miss-
ing, consult a dealer.
• The screwing aid (Fig. A2, part K) is a tool and not
an installable part.
Preparing tools/aids
(Fig. A3)
• Scissors
• Cross-head screwdriver, PZ1
• If needed: stable climbing equipment (step ladder)
• Screwing aid (Fig. A2, part K)
Installation
(Fig. 1-8)
⚠
Risk of falling!
> Only use climbing equipment that is resting on a
solid foundation and that offers good support and
high carrying capacity.
> Do not lean out of the skylight.
⚠
Risk of injury from falling components!
> To mount the product, only use fixing materials
that were included in the delivery and that are
suitable for the window frame material.
> Never place tools, components and fixing materi-
als on the climbing equipment.
> Keep children away from the installation site.
Settings
(Fig. 9)
Settings are not required after installation. The cord
tension is preadjusted at the factory.
If the handle rail of the blackout blind is not parallel to
the cassette, the handle rail must be aligned once.
• Open the handle rail fully (slide it toward the cas-
sette) and then close it completely.
Operation
(no figure)
• Hold the blackout blind at the centre of the handle and
slide it to the desired position. It stops in any position.
Care and maintenance
To ensure a long life, we recommend you clean the alu-
minium surface of the product at least once a year.
• Wipe the aluminium surface with a moist cloth only.
• Carefully brush off the blind.
English