9 Technical data
9.1 Eneo C | CC | CF
Technical data
Power supply
24 V DC (±5%), 2.5 A, SELV output voltage according to EN 60950-1
Continuous current consumption
25 mA
Current consumption
1.5 A (peak 2.3 A)
Relative air humidity
≤ 93%
Temperature range
Operation: –25 to +60 °C
Transport: –25 to +70 °C
Output relay load
Max. 40 mA,
flyback diode for inductive load present internally
Standards
EN 60 730-1, EN 50090-2-2
Low Voltage Directive complied with
CE conformity
9.2 Hand-held transmitter
Technical data
Hand-held transmitter
Up to 30 hand-held transmitters or hand-held transmitter buttons can be paired with the Eneo C | CC radio receiver
Radio receiver
Fitted in the drive unit
Security system
66 bit encoding and rolling code system
Every single unlocking process takes place with a new, automatically assigned code; access cannot be gained
through playing back a recorded code.
Frequency
433.92 MHz
Radio range
10 metres with a clear view of the door and full battery.
Radio licence for the following
countries
A, B, CH, D, DK, E, F, FIN, GB, GR, I, IRL, IS, L, LT, N, NL, P, S, CZ
Battery
Type 27 A (12 V)
Standards
CE conformity
9.3 Finger scan with app
Technical data
Dimensions of outdoor unit (W x H x D)
44.6 x 75.4 x 29.0 mm
Finger scan sensor
ATMEL FingerChip
TM
column sensor
No latent fingerprints
> 2 million uses
Operating voltage
8 to 24 V DC
Power consumption
Approx. 1 W
Relay data
24 V DC 500 mA (max.)
Temperature range
Operation: –20 to +85 °C
Relative air humidity
Up to 95%
IP rating
IP65 (outdoor use)
ESD performance
16 kV
Storage capacity
Up to 150 fingerprints
Fingerprint recording time
Approx. 1 second
Fingerprint identification time
Approx. 10 ms per comparison
False rejection rate (FRR)
Approx. 0.5%
False acceptance rate (FAR)
Between 0.00001~0.000001
(at – FRR 0.5%)
Switching duration
3 seconds
Standards
CE conformity
Technical data
86 ·
05 / 2020
·
IMO_438_EN_v3
Roto Safe E Eneo C | CC | CF
Subject to change.
