Calibrating a code
Sound LED
Confirm with
OK
The door is unlocked
INFO
If the process is repeated with the same keypad code, the keypad code will be deleted.
If a keypad code has already been saved via the app, it cannot be calibrated.
8.4.3 Deleting a keypad code
Deleting a code
Sound
LED
Enter the
six-digit door PIN
Confirm with
OK
Programming mode is initialising
Programming mode is active
When you hear a sequence of two ascending sounds and the blue LEDs stop flashing, the required keypad code can be
entered.
Enter the keypad code that is to be deleted
Confirm with
OK
INFO
If a keypad code is deleted that has been assigned to a mobile phone user via the app, this mobile phone
user will be kept.
Only the keypad code is deleted.
8.4.4 Calibrating a mobile phone
INFO
A total of six mobile phones can be calibrated.
Calibrating a code
Sound
LED
Activate
Bluetooth
on the mobile phone
Enter the
six-digit door PIN
Confirm with
OK
Programming mode is initialising
Programming mode is active
Pairing a mobile phone with
Phone & Code
via
Bluetooth
Enter the
six-digit door PIN
Confirm with
OK
Mobile phone calibrated successfully
Commissioning and operation
Phone & Code
Deleting a keypad code
Subject to change.
Roto Safe E Eneo C | CC | CF
IMO_438_EN_v3
·
05 / 2020
· 81
