■
Insufficient invitation to tender, non-compliance with installation specifi-
cations and non-compliance with the application diagrams (where
available).
■
Increased contamination.
Claims made by third parties against the hardware manufacturer on account
of damage resulting from misuse or failure to comply with the obligation to
give instructions on the part of hardware dealers, window, door and balcony
door manufacturers and building element dealers or the builder are passed
on accordingly.
The obligations agreed in the delivery contract, the general terms and condi-
tions, the hardware manufacturer’s terms and conditions of delivery and the
legal provisions applicable when the contract was concluded shall apply.
The warranty only covers original Roto components.
We reserve the right to make technical changes as part of improvement to
performance characteristics and further development.
1.12 Preserving the surface finish
ATTENTION
Surface treatments may cause property damage.
Surface treatments (e.g. painting and varnishing) on elements can
damage components or prevent them from working properly.
u
For masking, only use adhesive tape that does not damage
the paint coats. Consult the manufacturer if in doubt.
u
Protect components against direct contact with the surface
treatment.
u
Protect components against contamination.
ATTENTION
Using incorrect cleaning agents and sealing
compounds may cause property damage.
Cleaning agents and sealing compounds may damage the
surfaces of components and gaskets.
u
Do not use aggressive or flammable liquids, acidic cleaners or
abrasive cleaners.
u
Only use mild, pH-neutral cleaning agents that have been
diluted.
u
Apply a thin protective film to the components, for example
using a cloth soaked in oil.
u
Avoid aggressive vapours (e.g. produced by formic acid,
acetic acid, ammonia, amine compounds, ammonia
compounds, aldehyde, carbolic acid, chlorine, tannic acid)
around the element.
u
Do not use any acetic acid-crosslinking or acid-crosslinking
sealing compounds or those with the aforementioned constit-
uents as both direct contact with the sealing compound and
its fumes can corrode the surface of the components.
ATTENTION
Contamination may cause property damage.
Contamination prevents components working properly.
u
Remove deposits and contamination caused by construction
materials (e.g. plaster, gypsum).
u
Keep components free of deposits and contaminants.
General information
Preserving the surface finish
Subject to change.
Roto Safe E Eneo C | CC | CF
IMO_438_EN_v3
·
05 / 2020
· 13
