Roto Frank C600 Installation Maintenance And Operating Instructions Download

Page: 35 / 64

Subject to change.

Roto Safe C | C600 | C600 – Tandeo | H600

IMO_457_DE_v0



July 2017



Drilling and routing dimensions on the frame
C500 | C600 | H600 with 2 / 4 additional locks (CB, CH, C)

Pattern

0201

738

632

0203

738

752

0205

738

382

0207

738

982

0275

738

550

0293

738

1282

0605

438

382

0615

438

482

0813

738

982

368

482

0817

738

752

368

382

5253

368

382

5400

1310

Installation

Drilling and routing dimensions on the frame

C500 | C600 | H600 with 2 / 4 additional locks (CB, CH, C)

Carry out routing in accordance with the adjacent
drawing.

NOTE

The routing refers to PVC and aluminium
strikers.
Request the routing drawing for wood strikers.

NOTE

The routing depth depends on the leg height
on the striker.

Example – Combination striker:

– Striker height =

24.5 mm

– Leg height =

7 mm

– Min. routing depth = 17.5 mm

NOTE

The routing axis depends on the profile.

Routing axis

Faceplate marking

135

Summary of Contents for C600

































































Search results

Summary of Contents for C600

Reviews:

Related manuals for C600

Brands by name

Popular brands

Roto Frank C600, Installation Maintenance And Operating Instructions

Search results

Summary of Contents for C600

Reviews:

Related manuals for C600

Brands by name

Popular brands