36
FA ROTEX RoCon mb • 09/2017
5
x
Parameter overview
5
Parameter overview
5.1
For first commissioning or resetting to factory settings
Tab. 5-1 "Basic Configuration" parameters
The parameters listed in this section can only be
accessed when the ROTEX HPSU monobloc compact
is commissioned for the first time or has been com-
pletely reset.
During initial commissioning:
After resetting to factory settings:
●
Rotary switch setting: Info
●
Resetting to factory settings.
(see chap. 3.6.12 - Option 3)
●
Rotary switch setting: Info
●
Switch on the power supply to the ROTEX HPSU monobloc
compact.
Language
Use
Standard Config
Yes
No
Basic Configuration
Boiler Function
Unmixed Circ Config
BUS ID HS
Time Master
System Config
After each system restart, the "Configuration" level can-
not be accessed for approx. 3 minutes.
