Rotex Controller Series, Product Documentation

Page: 53 / 192

EbV Product documentation THETA NORM/UNIT
5-33
5.4.4.3 Control mode
Factory preset: 1
Setting range 1, 2
This parameter determines the control mode and has effects on the:
- Operating mode selected with the operating mode key
¢
- Daytime temperature selected with the "daytime temperature" key
¥
- Nighttime temperature selected with the "night-time temperature" key
¦
concerning the effect on the different heating circuits.
Setting values: 1: The selected setting (operating mode, daytime temperature,
night-time temperature) applies for all the heating circuits
2: Each heating circuit can be assigned its own setting (operating mode,
daytime temperature, night-time temperature).
5.4.4.3.1 Separate Control Mode Daytime Temperature
Function:
In this operating mode, the relevant setpoint applies only to the selected HC (=
unmixed circuit), MC 1 (= mixed circuit 1) or MC 2 (= mixed circuit 2)
Setting:
• Press
¥
key
• Select the desired heating circuit, HC, MC-1 or MC-2, using the rotary pushbutton
• Confirm the selected circuit by pressing the rotary pushbutton
• Set the flashing room temperature value by turning the rotary pushbutton to the
desired value.
• Confirm set value by pressing
¥
or
î
, press again: return to standard display
• Alternatively the value can be confirmed by automatic exit after the set time.
¥
ROOM DAY
HC
20.0
o
c