Gebrauchsanweisung ○
Mode d’emploi
○
Istruzioni per l’uso
○
Instruction for use
27
•
FILLING IN WATER
o
CAUTION! Always unplug the appliance before filling or emptying the tank. Never
place the iron under running water. Always use the enclosed measuring cup.
o
Proceed as follows:
Set the steam control dial (6) to "0“.
Tilt the iron, place the beak of the measuring cup on the filling port and slowly
pour the water into the tank.
Then set down the iron in a vertical position and set the desired temperature
using the temperature dial.
Plug in the iron and wait until the indicator lamp switches off.
•
SETTING THE TEMPERATURE
o
Select the desired temperature on the temperature dial. Set the iron down in a ver-
tical position and plug it in. The temperature dial lamp will light up, indicating that
the iron is heating up.
•
SYMBOLS
•
Low temperature. Synthetic fibres
••
Medium temperature. Silk, wool
•••
High temperature / steam. Cotton, linen
•
STEAMING
o
Turn the temperature dial to the desired temperature in the steaming range. Set the
iron down in a vertical position and wait until the indicator lamp switches off. Set the
steam control dial (6) to the desired steam volume and wait until steam appears be-
fore starting to iron. Setting down the iron in a vertical position automatically inter-
rupts the discharge of steam. You can also interrupt the discharge at any time by
setting the steam control dial to "0". The iron has a display window that indicates the
water level in the tank.
