Technical
Manual
FIVE-CHANNEL POWER AMPLIFIER
RMB-1095-2
Table of Contents
Specification
Specification.....................................1
Parts List ..........................................2 ~ 7
Adjustment........................................8
PCB Assembly .................................9 ~ 10
Schematic Diagram..........................11 ~ 12
SHINSEN-BLD. 4F 10-10 SHINSEN-CHO, SHIBUYA-KU,
TOKYO 150-0045, JAPAN
Serial. NO.
®
Quality Uncompromised
Y-316C-0209/pdf
Continuous Power Output
200 wats/ch into 8 ohms
(20-20kHz, < 0.03%)
DIN Power Output (1kHz, 1%)
330 wats/ch into 4 ohms
Total Harmonic Distortion (20Hz-20kHz, 8 ohms) < 0.03 %
Intermodulation Distortion (60Hz : 7kHz, 4:1)
< 0.03 %
Frequency Response ( 0.5dB, -3 dB)
15 Hz - 100 KHz
Damping Factor (20-20,000kHz, 8 ohms)
400
Speaker Impedance
4 ohms minimum
Signal to Noise Ratio (IHF A network)
116 dB
Input Impedance / Sensitivity
33 k ohms / 1.5 volt (unbalanced)
33 k ohms / 1.5 volt (balanced)
Power Requirement
115 volts 60 Hz (U.S. version)
230 volts 50 Hz (European version)
Power Consumption
800 watts
Dimensions (W x H x D)
440 x 240 x 398 mm
17
3/8
x 9
1/2
x 15
3/4
inches
Weight (net)
34 kg, 75 lb.
1201001 - 2021200
