22
MONITOR TYPE
4:3 LB
OFF
ON
EXIT
SCREEN SAVER
ON SCREEN GUIDE
AUDIO
DISPLAY
SYSTEM
LANGUAGE
PRESS
KEY
Playback discs
DVD with 48-kHz,
16-bit linear PCM
DVD with 48-kHz,
20/24-bit linear
PCM
DVD with 96-kHz,
linear PCM
DVD with DTS
DVD with Dolby
Digital
DVD with MPEG
audio
Video CD
SVCD
Audio CD
Audio CD with
DTS
STREAM/PCM
48-kHz,
16-bit linear
PCM
48-kHz,
20-bit linear
PCM
No output
DTS
bitstream
Dolby Digital
bitstream
MPEG
bitstream
44.1-kHz,
16-bit linear
PCM
44.1-kHz,
16-bit linear
PCM
DTS
bitstream
PCM ONLY
←
←
←
←
48-kHz, 16-bit
linear PCM
←
←
←
←
Output
DOLBY DIGITAL/PCM
←
←
←
No output
←
48-kHz, 16-bit
linear PCM
←
←
←
DIGITAL AUDIO OUTPUT
/PCM
STREAM
L
T
/ R
T
OFF
EXIT
DOWN MIX
COMPRESSION
AUDIO
DISPLAY
SYSTEM
LANGUAGE
PRESS
KEY
DIGITAL AUDIO OUTPUT
/PCM
STREAM
L
T
/ R
T
OFF
EXIT
DOWN MIX
COMPRESSION
AUDIO
DISPLAY
SYSTEM
LANGUAGE
PRESS
KEY
DIGITAL AUDIO OUTPUT
/PCM
STREAM
L
T
/ R
T
OFF
EXIT
DOWN MIX
COMPRESSION
AUDIO
DISPLAY
SYSTEM
LANGUAGE
PRESS
KEY
Audio Page
The factory default settings of the Audio Page
controls are: Digtial Audio Output–Stream/
PCM; Down Mix– L
T
/R
T
; Compression–Off.
These are the appropriate settings for when
the unit is connected to an external suround
sound processor.
Digital Audio Output
To connect the unit‘s digital output to an ex-
ternal device equipped with a digital input,
this item must be set correctly.
• PCM ONLY –
When you connect the DIGI-
TAL OUT jack of the unit to the linear PCM
digital input of other audio equipment.
• STREAM/PCM –
When you connect to
the digital input of an amplifier to a built-
in DTS, Dolby Digital, or MPEG multichannel
decoder.
• DOLBY DIGITAL/PCM –
When you con-
nect to the digital input of a Dolby Digital
decoder, or an amplifier with a built-in Dolby
Digital decoder.
The following chart shows the relationship
between types of playback discs and output
signals.
NOTES:
The unit does not provide the DTS decod-
ing function.
When playing a DVD VIDEO or Audio
CD disc with DTS, use a DTS decoder to
get correct signals from your speakers.
Never use the unit’s analog output jacks,
which output incorrect signals that may
damage your speakers.
If you connect the analog outputs and
digital outputs simultaneously, be sure to
select the source of the amplifier correctly,
or set the level control of the amplifier con-
nected to the analog outputs to minimum.
Down Mix
To playback a DVD VIDEO disc recorded with
surround multichannel audio correctly, the
DOWN MIX setting must be properly made
according to your audio system. Note that this
setting affects the output signal from the
ANALOG output jacks when playing back a
DVD VIDEO disc recorded with surround
multichannel audio.
• L
T
/R
T
– When you enjoy multichannel sur-
round audio by connecting the unit’s ANA-
LOG output to a surround decoder.
• Lo/Ro
– When you enjoy conventional 2-
channel stereo audio by connecting the unit’s
ANALOG output to a stereo amplifier/receiver
or television set, or when you duplicate au-
dio of a DVD VIDEO disc recorded with sur-
round audio to your MD, cassette, etc.
NOTE:
The Down mix function does not
work when the 3D PHONIC function is ac-
tivated.
Compression
You can compress the dynamic range of the
sound if needed. Using this function, you can
listen to sound at low volumes easily.
• ON
– Audio is played back with the dy-
namic range compressed.
• OFF
– Audio is played back as it was re-
corded.
NOTES:
The Compression function works only when
playing back a disc recorded with DOLBY
DIGITAL 1CH or 2CH. The setting is not ef-
fective for other discs.
The Compression function does not work
when the 3D PHONIC function is activated.
Display Page
Monitor Type
You can select the monitor type to match your
TV when you playback DVD Video discs re-
corded for wide screen televisions.
4:3 LB
(Letter Box Conversion)
When you connect a normal TV to the unit.
When you play a wide picture recorded on
a DVD VIDEO
disc, the picture
is displayed with
bands across the
upper and lower
portions of the
screen.
RDV-995
DVD Player
