Technical
Manual
STEREO CONTROL AMPLIFIER
RC-1070
Table of Contents
Specification
Specification...................................... 1
Parts List ........................................... 2~3
Case Outlines.................................... 4
Safety Caution................................... 4
PCB Assembly .................................. 5~6
Schematic Diagram .......................... 7~10
Total Harmonic Distortion (20 Hz-20 kHz)
< 0.006%
Intermodulation Distortion
< 0.006% at 1 V output (60 kHz:7 kHz, 4: 1 )
Input Sensitivity / Impedance
Line Level: 150 mV / 24 kOhms
Phono (MM): 1.2 mV / 68 kOhms
Output Level/Impedance
1 V / l00 Ohms
Usable Headphone Impedance
8 - 2,000 Ohms
Frequency Response
Line Level : 4 Hz - 100 kHz, +0, -3dB
Phono: 20 Hz - 20 kHz,
±
0.5 dB
Signal to Noise Ratio (IHF "A" weighted)
Line Level: 95 dB
Phono: 70 dB
Phono Overload:
70 mV
Power Requirements
USA: 115 Volts, 60 Hz
CE: 230 Volt, 50 Hz
Power Consumption
10 Watts
Dimensions (W x H x D)
430 x 92 x 344 mm
17" x3
5/8
" X 13
5/8
"
Weight (net)
5.4 kg, 11.9 lbs.
SHINSEN-BLD. 4F 10-10 SHINSEN-CHO, SHIBUYA-KU,
TOKYO 150-0045, JAPAN
Serial. NO.
Beginning
®
Quality Uncompromised
Y-332A-00115C/S-S
Summary of Contents for RC-1070
Page 4: ......
Page 5: ...PCB Assembly 5 6...
Page 6: ...7 8 Schematic Diagram...
Page 7: ...9 10 Schematic Diagram...
