Technical
Manual
RB-1072
Table of Contents
Specification.....................................1
Parts list...........................................2~5
PCB Assembly.................................7
Schematic Diagram..........................8
10-10 SHINSEN-CHO , SHIBUYA-KU,
TOKYO 150-0045, JAPAN
Serial. NO.
®
Quality Uncompromised
Y-401A-0706/pdf
STEREO POWER AMPLIFIER
Wiring...............................................6
Specifications
Power Configurations
2 x 100 watts
Watts/Channel
100 watts, both channels driven, with 20KHz filter,
8 ohm load, 20-20 kHz, 0.02% THD
Total Harmonic Distortion (20Hz-20kHz, 8 ohms)
Continuous Rated Power
< 0.2%
One-Half Rated Power
< 0.2%
One Watt per Channel
< 0.2%
Power Output (4 ohms, 0.09% THD)
190 watts
Output Peak Current
11A
Intermodulation Distortion 60 Hz:7 kHz, 4:1
< 0.2%
Damping Factor (8 ohms)
200
Amp Gain
27.2dB
Input Sensitivity/Impedance
1.25 V / 9.9 k ohms
Frequency Response
10 - 40 KHz (±3dB)
Signal to Noise Ratio (IHF A)
109dB
Power Requirements
USA
120 volts, 60 Hz
Europe
230 volts, 50 Hz
Power Consumption
130 watts
21 watts - Idling
3 watts - Standby
Dimensions (W x H x D)
432 x 72 x 350 mm
17
1
/
8
x 2
7
/
8
x 13
3
/
4
in
Panel Height (for rack mounting)
60 mm, 2
3
/
8
in
Weight (net)
4.6 kg, 2.1 lb.
Begining
