d0
50
25.
fm
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 i Series
Edition 1/Rev. 0
05-00-00
page 12
January 01/2012
1.6)
Acceptable methods, techniques and practice
General note
All general inspection, maintenance and repair has to be carried out in
accordance with Advisory Circular AC 43.13 from FAA.
Advisory Circu-
lar
This Manual "Advisory Circular" AC describes maintenance methods,
techniques and practice. These are recognized and authorized for inspec-
tion and repairs in non-pressurized areas for which there are no separate
maintenance and repair instructions.
Self-locking
All instructions regarding the securing and lubrication of parts must be
observed Adherence to specified torque values is required.
Nut securing
When using a self-locking nut, make sure the polyamide insert ring meets
the requirements of DIN 985. Be sure that the securing elementon the nut
is positioned towards the outside, in accordance with DIN 980.
Lock washer
NOTE:
When fitting lock washers, the curved-up ends (1) must
point towards the screw head or nut.
00144
WARNUNG
NOTICE
Self-locking nuts, cotter pins, tab washers and safety
wires must be replaced each time they have been re-
moved.
1
1
Summary of Contents for 912 iS Sport
Page 1: ...AIRCRAFT ENGINES ref no MML 912 i part no 898742...
Page 157: ......
Page 158: ...AIRCRAFT ENGINES www cps parts com 800 247 9653...
