16
®
A
B
C
ON
OF
F
ON
OF
F
ON
OFF
ON
OF
F
22. Installing The Master Control Cover:
Attach the switch contactors from harness on back plated of master
control to the master control cover. Tabs that lock switch contactors into
place must be orientated upward, Fig. 24.
23. Installing Master Control Cover, Slave Cover And
Enclosures To Lift:
A) Cut to fit gaskets and install around master control cover and
slave cover, Fig. 25.
B) Wire tie all hoses and cables together, Fig. 25. NOTE: Trans-
parent hose guard should be placed at top of enclosure to
prevent chafing.
C) Master control panel attaches to column with (3)
M6 x 1.0 x 10Lg. flanged BHCS and rubber washers, Fig. 25.
Fig. 24 Detail
A Master control cover
B Switch contactor for UP and Down button. Snap into place
and lock into UP and Down button.
C Switch contactor for LOWER TO LOCKS button. Snap into
place and lock into LOWER TO LOCKS button.
D) Enclosures will attache to column with
M6 x 1.0 x 10Lg. flanged BHCS and rubber washers, Fig. 25.
E) Slave cover attaches to column with (3) M6 x 1.0 x 10Lg.
flanged BHCS and rubber washers, Fig. 25.
F) Covers and enclosures should be attached in 10 places.
Fig. 24
Summary of Contents for SPOA3TE 600 Series
Page 22: ...22 NOTES...
Page 23: ...23 NOTES...
