Rotary AR43-5MB, Operating And Maintenance Manual

Page: 10 / 64

2. Safety
4
Rev. D 2013_03_en
2.3 Permitted axle loads and weight
distribution
Before lifting the vehicle, you must ensure that the
weight distribution is correct.
When the weight distribution is correct (default posi-
tion in direction of motion) the main load is located
at the front (e. g. engine).
WARNING
Risk of injury through toppling of
the vehicle when incorrectly load-
ed.

Comply with the permitted load capacity as in
Fig. 1 and 2.

Comply with the permitted weight distribution
as in Fig. 1 and 2.

Comply with the approved distances between
pick-up points as in Fig. 3.
Figure 1: SM40LT (with rolling jack)
Load capacity
●
Main lift 4000 kg
●
Rolling jack 3000 kg
Permitted weight distribution
●
Main lift front max. 2/3:
F1 = max. 2670 kg
back max.1/3:
F2 = max. 1330 kg
●
Rolling jack front max. 3/5:
F1: 1800 kg
back max.2/5:
F2: 1200 kg
Figure 2: SM40, AR43-5MB, SM55M51 VAS or
SM60
Load capacity
●
AR43-5MB 4000 kg
●
SM40, SM40-47 BMW 4000 kg
●
SM55M51 VAS 5500 kg
●
SM60 6000 kg
Permitted weight distribution
●
SM40 front max. 2/3:
FA1 = max. 2670 kg
back max.1/3:
FA2 = max. 1330 kg
●
SM60 front max. 2/3:
FA1 = max. 4000 kg
back max.1/3:
FA2 = max. 2000 kg
Figure 3: Approved distance between pick-up
points on rolling jacks
●
Length max. 1.7 m
●
Width min. 1.2 m
1
2
3
●
SM60 front max. 2/3:
FA1 = max. 3667 kg
back max.1/3:
FA2 = max. 1833 kg