Rotary Lift ML40, Operation & Maintenance Manual, Page: 40 / 92

Maintenance and inspections
38
9.6.3 Inspection list
All functions tested with no problems
-----------------------------------------------------------------------------------------------------
Date, Signature
Sequential no.:
Machine type:
Machine no.:
Inspector:
Mechanical system
Cylinder studs secured
Scissors bolts secured
Machine in clean condition
Notices present and legible
Welded points undamaged
All screw connections are tight
Hydraulic system
No leaks in the hydraulic system
Oil level is sufficient ( Chap. 9.5.1, page32 )
No damage of the hoses
Hydraulic hoses not more than 6 years old
Machine holds load at least 10 minutes in the highest position
Electrical system
Cables and cable grips tight
Cables are secured
No damage of the cables
Upper position sensor stops the lifting motion
Euro Stop sensor stops the lowering motion