C
3/16”
THREADLOCKER
Mount one rack to each swivel block on either side of your tower using
the hardware provided. The racks are not side specific. Apply red
thread lock to all 8 bolts first.
x8
Torque bolts
to 15ft-lb
Chaparral Triton Usage Instructions
www.roswellmarine.com
3
D
Your Triton rack is designed to be adjustable to
fit just about any size of wakeboard, wakesurfer
or wakeskate. There are 2 settings, one for
narrower boards, one for wider boards.
E
Adjust your telescopic arms one at a time. To adjust your telescopic
arms loosen the knobs on both sides of the rack for the same arm
until the knobs are past the counterbored holes they sit in. At this
point you will be able to slide the whole arm assembly up or down
to the next position where you will then retighten the knobs.
Knob to loosen/tighten
Tighten
Make sure your adjustment
knobs are tight periodically.
Narrow board setting
Wide board setting
In the narrow setting, the
max board width should
be no greater than 20”
inches and no less than 14”
inches.
In the wide setting, the
max board width should
be no greater than 23”
inches and no less than
17” inches.
