Chaparral Triton Installation Instructions
www.roswellmarine.com
2
PACKAGE CONTENTS
TOOLS NEEDED
THREADLOCKER
RED
BLUE
3/16” Allen Key
5/32” Allen Key
5/16” Allen Key
(x2) Chaparral
Triton Rack
(x2)
Mag Swivel
(x2)
Rack Spacer
(x2) Set of Tower
Adapters
x8 x4
x8
x4
x8
x4
x4
x8
x4
Torque
wrench
Phillips
Screwdriver
3/16”
5/32”
THREADLOCKER
Torque bolts
to 15ft-lb
5/16”
BLUE
THREADLOCKER
THREADLOCKER
Torque bolts
to 25ft-lb
Roswell strongly recommends that a routine inspection of hardware and components be done to ensure
proper function and safety and to maximize product life. If bolts are found to be loose, discontinue use
until Loctite is re-applied and bolts are re-tightened.
B
Apply red thread lock to the swivel alignment pins and thread them into the
board rack spacer. Next, apply red thread lock to the countersunk 1/4-20 x 2.25”
screws and attach the swivel and spacer to the board rack. Torque to 15 ft. lbs.
ATTENTION
1/4-20 x 2.25”
3/8-16 x 4.00”
1/4-20 x 2.25”
Swiv
el A
lig
nmen
t P
in
6-32 x 0.50”
3/8-16 L
ock Nut
3/8”
w
asher
x4
x4
x4
x8
A
First, bolt the adapter blocks to the port and starboard tower tubes.
Torque the locknuts to 25ft-lbs. Second, apply blue threadlock to
the four 6-32 x 0.50” and install the aluminum cover plate.
Note orientation
of swivel: Handle to top.
