Glass Body Fat Monitor
with Scale
OBM_IB_WD224_EN_SW_v
er1421
IN0WD224000000010
15. Safety instructions for CR2032 lithium batteries
1. Lithium batteries are lithium manganese cells. If you do not use the monitor over a longer
period, you should take out the batteries of the device.
2. Never open the lithium battery, do not put into fire, or expose to shocks because an explosion
risk lasts or discharge of poisonous exposure to fumes might possible.
3. Never touch leaked cells with bare hands.
4. When eyes or hands are contaminated, it is essential to rinse with lots of water. You should
go to a doctor if skin or eyes are irritated.
5. Dispose cells only completely discharged or protected against polarity reversal wrapped ac-
cording to your local disposal regulation.
6. Do not expose the cells to direct solar radiation and store away from heat; otherwise, there
is risk of overheating.
7. Maintain a storage temperature of < 40°C. Disposal of old electrical and electronic equipment
7.Interpreting the BMI Result
BMI
BMI
(Designation by the WHO)
BMI Indicator
BMI Ranges
BMI < 18.5
- Underfat
-
--
---
7.0 - 10.7
10.8 - 14.5
14.6 - 18.4
18.5 ≤ BMI < 25
0 Normal
----
-----
------
18.5 - 20.5
20.6 - 22.7
22.8 - 24.9
25 ≤ BMI < 30
+ Overfat
-------
--------
---------
25.0 - 26.5
26.6 - 28.2
28.3 - 29.9
30 ≤ BMI
++ Obese
----------
-----------
------------
30.0 - 34.9
35.0 - 39.9
40.0 - 90.0
13. Error Messages
“
“:
on the left bottom corner = Batteries are used up - Please replace the batteries with
the intended type (2 x CR2032).
“ Err“:
1. The weight exceeds the maximum capacity of 180 kg. Please immediately remove the
critical load to avoid load cell damage.
2. Exceed the body fat measurement range 5.0~50.0%
3. Not bare feet for taking body fat measurement.
4. Step off the monitor before body fat analysis procedure complete.
5. Not step onto the electrodes for body fat measuring.
6. The soles of your feet are not clean, e.g. feet perspiration..etc. to interfere the body
fat measurement.
14. Technical Data
Capacity x graduation:
max. 180 kg x 100 g
Display resolution:
body fat: 0.1%
Body fat:
5.0~50%
32 memories
4 users
Age:
10 – 80 years
Body height:
100 – 240 cm
Dimensions:
approx. 300 x 300 x 18 mm
Batteries:
2 x CR2032 (included)
*Subject to technical modifications
www.rossmax.com
Instruction
Manual
EN
Model:
WD224
Warranty
Registration
(Must be completed within 10 days of purchase)
Customer Name: ______________________________________________
Street Address: _______________ City: ___________________________
State: _____________________ ZIP code: ________________________
Telephone: _________________ E-mail address: ___________________
Gender: Male Female Age:
Product Information
Date of purchase: _____________________________________________
Store where purchased: _________________________________________
Price Paid (excl. Tax): ___________________________________________
This instrument is covered by a 2 year guarantee from the date of purchase, batteries and accessories are not included.
The guarantee is valid only on presentation of the guarantee card completed by the dealer confirming date of purchase
or the receipt. Opening or altering the instrument invalidates the guarantee. The guarantee does not cover damage,
accidents or non-compliance with the instruction manual. Please contact Rossmax service.
Manufacturer
: Rossmax Swiss GmbH
Tramstrasse 16, CH-9442 Berneck, Switzerland
www.rossmax.com
12. Change battery
Open the battery cover at the bottom side of the monitor and insert
the supplied batteries (2 x CR2032). Please ensure the correct
polarity of the batteries (+/-).
10.Recalling Values from Memory
1.The monitor has four memory zones (P1,P2,P3,P4). Each zone can store up to 8 measure-
ments.
2.Press the “ “ button to turn on the monitor.
3.Press “ “ or “ “ to select a memory zone from which you want to recall values.
4.Press the “M”button to read the values. Continue to press the “M” button to view the last
previously stored values in different date.
Note
•If the stored values are measured in the same date, no need to press “M” button, the next
recalling values will show continuelly after 3 seconds time interval on display.
•The memory bank can store up to 8 readings per memory zone. When the number of readings
exceeds 8, the oldest data will be replaced with the new record.
Based on the values for obesity judgment proposed by WHO, the World Health Organization.
11. Weight function (weight measurement only)
1. Turn the monitor on:
• Press button to turn on the monitor.
2. Select “-P0-” personal data number:
• Press
- or
- or button to select “-P0-” personal
data number about 5 seconds later “0.0 kg”. Now the
monitor is ready to use. Before 0.0 kg appears, please
don’t step on the monitor.
3.
Step on the monitor. Remain stationary on the weighing platform and do not hold you tight.
4.
After the monitor levelled-off, your weight will be indicated for 6 - 10 seconds steady. After-
wards the monitor switch-off automatically.
NFC
Near Field
Communication
WARNING:
The symbol on this product means that it’s an electronic product and following the European directive 2012/19/EU the electronic
products have to be dispose on your local recycling centre for safe treatment.
OBM_IB_WD224_EN_SW_ver1421.indd 1
2014/9/23 上午11:11