Instruction
Manual
Model:
Neb Tester
Portable Testing Device
for Nebulizer
www.rossmax.com
OBM_IB_N
eb
Test
er_
EN_SW_v
er2118
Manufacturer: Rossmax International Ltd.,
12F., No. 189, Kang Chien Rd., Taipei, 114, Taiwan
www.rossmax.com
Specifications
Cautions and maintenance
1. This device should be used with nebulizer only.
2. Place the device and nebulizer on a flat, horizontal surface while in use.
3. The device must be in a vertical position while in use.
4. Turn the regulator slowly to avoid possible damage.
5. Do not completely unscrew regulator stem.
6. Do not attempt to disassemble the device.
7. Avoid excessive vibration, physical impact and dropping.
8. Do not store the device in direct sunlight, high temperature or humidity.
9. Keep the device away from static electricity.
10. For the first use, open the rubber vent-plug on the back side of pressure gauge and
then close it in order to balance the pressure after the transportation.
Note: Do not open the rubber vent-plug when the device is in a vertical position to avoid
leakages of oil material from the pressure gauge.
Power source
No need
Operating temperature
0 ~ 54ºC
Storage temperature
- 10 ~ 60ºC
Air flow
scale
1 ~ 10 L/min
accuracy
± 4% of full scale
Pressure
scale
0 ~ 60 PSI
accuracy
± 2% of full scale
Weight
1000 g
Dimension
128 (L)*120(W)*158 (H) mm
