Rosslare Mifare AS-B01, Hardware And Software Manual, Page: 43 / 50

Field Descriptions
CP-R25 Hardware and AS-B01 Software Manual 43
B. Field Descriptions
The following table describes the various fields that appear in the AS-B01
software application when configuring the CP-R25 Desktop Programmer,
Mifare
®
cards and/or tags:
Table 2: Field Descriptions
Field Name Description
Card Serial Number (CSN) In the
Operation Mode area this option is selected if the
reader has to transmit only the card serial number. Each
Mifare
®
card has a Unique Serial Number (UID) to uniquely
identify the card.
Card Type
•
The Mifare
®
card type determines the size and
memory location on the card. There are two options:
•
Mifare
®
1K memory – The 1024 x 8 bit EEPROM
memory is organized in 16 sectors with 4 blocks of 16
bytes each. In the erased state the EEPROM cells are
read as a logical “0”, in the written state as a logical
“1”.
•
Mifare
®
4K memory – The 4096 x 8 bit EEPROM
memory is organized in 32 sectors with 4 blocks and 8
sectors with 16 blocks. Each block contains 16 bytes.
In the erased state the EEPROM cells are read as a
logical “0”, in the written state as a logical “1”.
Confirm Password Used to confirm a new password entered in the New
Password field.
Current Password Password used to enter the AS-B01 software application,
and when changing the password.
Enable Buzzer Activates or deactivates the reader’s buzzer control.
Enable LED Activates or deactivates the reader’s LED control.
Failed operation Enables the reader to transmit to the panel any failed
operations. These are then displayed in the Message Log
Area of the GUI.
ID Location All sectors in the Mifare
®
card contain 3 blocks of 16 bytes
for storing data. This parameter defines where the data is
stored in these data blocks. The location is defined by the
company security specifications.
KeyA Password Unique key used as a security access code. This code used
is specified by the company security policies. The key is
entered as a 12 digit hexadecimal value with digit values
of 0-9, A-F.
Keypad Defines the keypad type used to enter codes on an access
reader.