Controller Functionality
48
AYC-x6355 (Rev. B) Installation and User Manual
7.9.7
Changing the Normal/Bypass Code and Door
Chime Settings
To change the Normal/Bypass code and door chime settings:
1.
Enter Programming mode.
2.
Press
5
to enter Menu 5.
The left LED flashes orange.
3.
Enter the new code you wish to set as
Normal/Secure code.
There are four different ways to program the Normal/Bypass code
and door chime.
Enter the code
0000
to disable both
Bypass code and the door chime.
Enter the code
0001
to disable the
Bypass code and enable the door chime.
Enter any code ending with 0 to enable
the Bypass code and disable the door
chime.
Enter a code not ending with 0 to enable
the Bypass code and enable the door
chime.
You hear three beeps.
The system returns to Normal mode.
Green
Orange Green
Green
