1. Introduction
The AY-B86x0 series are biometric fingerprint and RFID card readers with a compact design, which are suitable for
installing on a door frame. The USB power supply and debug make operations simple. The reader IP65 certified for
outdoor use.
Using AxTraxNG, you can register and delete users (see the
AxTraxNG™ Software Installation and User Manual
).
Alternatively, you can use master cards to register and delete users while in an offline state.
The standard Wiegand output seamlessly connects to the third-party access controllers.
The reader comes in two models:
•
AY-B8620 – 125 kHz EM RFID card reader
•
AY-B8650 – 13.56 MHz MIFARE card reader
2. Installation
2.1. Mounting
1. Using the back panel as a guide, drill four holes for mounting the back plate onto the surface.
Wall Mounting
2. Insert a suitable wall plug into each screw hole.
1
AY-B86x0
Outdoor Optical Fingerprint
1:N with RFID Reader
User Guide
