¡Error! Utilice la ficha Inicio para aplicar Heading 1 al texto que desea que
aparezca aquí.
AC-425 Hardware Installation and User Guide
15
3.1
Inputs Wiring – Non-Supervised Inputs
Figure 3: Inputs Wiring – Non-supervised Inputs
3.2
Inputs Wiring – Supervised Inputs
When wiring the AC-425 for supervised inputs, resistors should be placed on the input
switch and not on the terminal block.
For more details, refer to Chapter
3.3
Outputs Wiring
The following diagram illustrates wiring for two main types of 12 VDC electrical release
mechanisms. Other electrical devices can be switched using the voltage free relay contacts.
AC-425 #3
JP7 RS-485
