12V/24V Heavy-Duty Battery Charger
E&OE
©2017 Rossi
4
Equipment Safety
•
Locate the charger as far away from the battery as the charger cables allow.
•
Do NOT charge a frozen battery. If battery fluid (electrolyte) is frozen, place the battery in a warm area to
thaw before charging.
•
Do NOT allow battery acid to contact the charger or any of its components.
•
Do NOT place a battery on top of the charger.
•
Do NOT place the charger directly above a battery being charged. Gases from the battery may corrode
and damage the charger.
•
Do NOT allow the battery terminal clamps to touch at any time when the charger is energized.
•
Do NOT start a vehicle engine with the charger connected to the vehicle battery.
•
Boat batteries should be removed from the boat and charged on land.
•
Always select the correct voltage of the battery being charged. Do NOT charger a battery using a
different voltage to the battery rating.
•
Always follow battery manufacturer instructions for battery charging.
•
Always follow vehicle manufacturer instructions for in-vehicle battery charging or jump-starting.
•
When using the equipment, basic safety precautions detailed here must always be followed to reduce
the risk of fire, electric shock, personal injury and material damage.
•
To provide a good electrical connection, ensure that the battery terminals and battery charging clamps
are clean before connecting them.
•
Ensure the electrical supply conforms to the equipment requirements.
•
To reduce risk of electric shock, disconnect the equipment from the electrical supply before connecting
batteries, cleaning etc.
•
Do not use an extension cord unless necessary. Use of an improper extension cord could result in fire or
electric shock. If an extension cord must be used, make sure that:
•
The extension cord socket is compatible with the charger plug.
•
The extension cord is properly wired and in good condition.
•
The extension cord wire gauge is suitable for the charger current rating.